DIY Growth Charts

My kids like to see that they are getting SOOOO big! They always want me to measure them.

We had a wall at our old house where we marked their heights on the wall every six months...but with 4 kids all growing-the wall got to looking very cluttered. :)

I decided it was high time they had their own growth charts.

I started by cutting a piece of plywood into 4 somewhat equal pieces. The size isn't important, as long as you mark it right later on.



The tutorial I am showing now is for the 3 boys, I did another style for my girl that will be shown in another tutorial.

I sprayed the three boards with Krylon Gloss Blue Ocean Breeze. I had to use two cans to get the coverage I needed...it really pays to sand better...and to have someone to hold your needy baby for more than 5 minutes while trying to sand and paint would also be a big help! :)

Using my trusty old school Cricut and some black vinyl I cut out the numbers for the boards. I wanted to give them a playful look, so I did an assortment of styles.

Then I applied them, I wanted them all to be a little bit different but still cohesive since eventually they will all be hanging next to one another. My husband measured out the boards and decided that 5'4" is tall enough...they aren't going to want these long before they reach that height I'm sure. I wanted to be sure I could put their birth height on them and then on up. So I measured from the top as 5'4" and then moved down.

For the marks on the board I used the scraps of the vinyl from cutting out the numbers and letters-finally it didn't feel like such a waste! I hate cutting things on the vinyl only to have a couple things cut out and lots of unusable space left. This was a perfect use of those scraps.

Using a tape measure, I pulled the end to the top and left the holder at the bottom marking my inches. Note that these inches were not the actual measurements, I was just using the inch marks as guides. I cut fatter pieces of vinyl for the foot markers and the half foot markers.

Then I marked all the other inch marks. The easiest way I found was to cut long thin strips, mark the inches and then cut it off after marking it. Saved a lot of time from cutting a bunch of tiny little pieces and trying to place them in just the right spot.

I attached a DISChanger to the back of each one. These things are so easy to use. Just wet the backs, wait a few minutes for them to get tacky and stick them on. You let them dry on their good and tight over night and they are super strong.

My last step was to put a vinyl chalkboard label on from ten23 designs.

I can then write how big they are on whatever day they want to be measured.

Notice the awesome art work that this little thug contributed to the walls?

Mind you we've been here for just about a month. Grrrr!

The littlest guy's is in his room...he's not quite ready to share a room with the "big" boys yet, but he wanted to get in on the measuring that was going on in this room.

My final goal is to gather pictures from each year of their lives around their birthdays and post them up the side at each height and write their height and weight on them...maybe have them looking like Polaroids up the side.

What do you think?

This post can also be seen over at the DIY Club.

See all of my posts over there while you are at it!

Let's be friends!

DIY Cultured Knives

This kind of thing has been done before...and I am certain it will be done again.

But just in case you don't know how to give your kitchen a super quick and happy pick me up...

Here are the steps;

1-Get tired of looking at your run of the mill ugly old knife block.

2-Take it outside with a beautiful gleaming can of Black (or any other color you desire) Krylon Spray Paint and spray her down. It doesn't take much to cover it up and make it nice and pretty.

3-Bring your now beautiful knife block back into the kitchen and fill it with knives that need to be replaced...or at the very least sharpened.

4-Then think that your knife block needs just a little something extra...not a stencil this time...not a vinyl letter this time...but a vinyl chalkboard sticker from ten23 designs!

But what oh what do you write on your super cool little chalkboard.

Your name? Nah.

Someone else's name? Maybe.

You know, like...Sling Blade or something.

Get stumped for a little bit.

Then realize that Google has a really cool translator tool, Google Translate that you just type in a word such as "knives" and the language "Italian" and your knife block is not only pretty and shiny...but it's now cultured as well.

"Arrivederci!" (That's how you say goodbye in Italian-yay for Google Translate!)

This post can also be found over at the DIY Club.

See all of my posts over at the DIY Club and be sure to enter the monthly contest.

It's a BIG one! :)

Let's be friends!

Adorable!

I haven't forgotten about Making the World Cuter...my baby sister has been picking up a lot of my slack...just check out my adorable new niece! (My sister is pretty cute too!)Nothing is as cute as a brand new daddy...especially one with a little girl who does nothing but sleep and eat wrapped so tightly around his finger.We could not get this child to sleep for more than a couple minutes...she was wide awake and curious as to why I was sticking a big black camera in her face. Isn't she pretty? Oh...I miss her already!

This sign I made for her room with some of the adorable vector designs from My Vinyl Designer (and my friend's Silhouette).

The saying was from, Modern Wall Art 13 and the tree was from, Modern Wall Art 1 . If you are looking for some cute designs to cut with your vinyl cutters-don't look elsewhere-they have a lot of everything! The tree and the word "darling" are cut from white vinyl and the "Sweet Dreams" is cut from paper, and I modpodged it on there.

I made this a long time ago, but didn't want to show it until my sister had seen it, it will be hanging in sweet Elliot's nursery. Her nursery is blue with pink and purple accents...adorable just like her. :)

Check out these cute sites to make your world cuter!

Giveaway! My Vinyl Designer Starter Package Combo $179 value!

EDIT: GIVEAWAY NOW CLOSED-WINNER ANNOUNCED ON JUNE 8TH CHECK MY VINYL DESIGNER'S FACEBOOK PAGE FOR WINNER!
Do you like cute stuff?

Do you like to make cute stuff for yourself?

Do you like to make cute stuff for others?

Do you like to make money selling cute stuff to others?

yes, yes, yes and YES!

Have you heard of My Vinyl Designer?

They offer thousands of premade, ready-to-cut vinyl designs, tips, how-to's and finished project ideas! They can be downloaded 24/7 and are perfect for vinyl cutting, scrapbooking, embroidery, screen printing, digital and off-set printing, fabric design, engraving, laser cutting and more!

Here are a few cute projects found there;

The cute sisters at My Vinyl Designer is giving one lucky reader their AHH-mazing Starter Package Combo that includes just about every design you could ever want, and probably way more than you will ever need!

Are you kidding me?!? You are basically getting the chance to win an awesome at home business here, or at the very least everything you need to make EVERYONE on your holiday lists the best and most personalized presents EVER!

If I won this, I would make family trees with the stick figures for all of my friends and families all personalized on plaques or tiles....and then maybe some hand soap dispensers for everyone...and then of course some clock faces for my mom who just loves them...and some growth charts for my kids....and....

---

Giveaway Details

The Prize: One Starter Package Combo. Valued at over $175!
What it includes;

Here is what the Starter kit includes:

1- VECTOR ART FOR THE HOME CD This is a digital compilation of premade sayings, scriptures, quotes, growth charts, clock faces, etc., sprinkled with a few fun clip art images … it’s quite unlike any other wall words vector art package you’ve seen! It includes the first five 87-design master collections, complete with printable PDF catalogs, blank catalog pages for your own designs, and web-safe thumbnails for marketing … basically a turn-key vinyl business package. They even added our embellishments collection as a bonus!

2- STICK FIGURE PLUS COLLECTION This collection of stick figure vector art graphics is a digital compilation of completely interchangeable stick figure elements … sprinkled with some tips and how-to’s for making adorable stick families. It includes 120 bodies, 84 faces, 14 animals, 131 elements and non-stick family options, a pleasantly designed 5-page PDF catalog, and web-safe thumbnails for marketing. They even added a PDF customer order form for businesses. It’s truly the cleanest, most optimized stick figure vector design collection on the web!

To Enter: Leave a comment for each item that you do.

1. Go to My Vinyl Designer and come back and tell me what your favorite item is that they carry.
2. Like My Vinyl Designer on Facebook and tell them thanks for the fun giveaway!
3. Tweet about this giveaway (you can click on the 't' at the bottom of this post to take you straight there and give you a cheater tweet-which is a totally legit entry!)
4. Facebook about this giveaway (do the same thing as above except with the 'f'')
5. Blog about this giveaway with a link back here to this post.

The Fine Print....

Giveaway ends Tuesday June 7th at which time a winner will be chosen by random.org and will be displayed on my sidebar and on My Vinyl Designers Facebook page. Winner will have 48 hours to claim their prize, or a new winner will be chosen. Open to all US Resident 18 or older. Void where prohibited. My Vinyl Designer is offering this prize to one winner. No compensation was given for this post.

---

Check out these cute sites to make your world cuter!